Characteristics:
• Super Tilefix is a premium grade grey cement based tile
adhesive.
• It is designed for bonding all types of ceramic, stone and mosaic
tiles, onto rigid concrete, render, rendered brickwork, and block
work surfaces.
• It can be used internally or externally on wall and floor surfaces.
• Super Tile fix can be used for fixing low porosity tiles.
• Super Tilefix can be used for tiling in immersed situations like
pools and spas when used with RLA Uniflex Additive.
• Do not use Super Tilefix for moisture sensitive stone like green
marble.
Preparation:
• Ensure all concrete slabs are allowed to cure for at least 6 weeks
and have a wood float finish.
• All rendered surfaces must be allowed to cure for at least 7 days
prior to commencing tiling.
• Ensure all surfaces are sound, dry and free from movement, oil,
dust, grease, wax, curing compounds, release agents and any other
loose contaminating materials.
• Steel trowelled finished concrete surfaces must be mechanically or
chemically abraded prior to commencing tiling.
• The maximum variation in the plane of the concrete must not
exceed 5mm in 3 meters for floors and 4mm in 2 meters for walls.
• It is recommended that all surfaces must be primed with Uniprime,
especially porous surfaces, to ensure a sound bond of the adhesive
to substrate.
• When applying the primer onto floor surfaces it is recommended to
firstly pour some primer in a section then spread the primer using a
brush or roller. Continue this method of application until the entire
area is primed.
• Allow the primer to dry for approximately 30 - 40 minutes at 20°C
prior to commencing tiling.
• Any excess Uniprime that has not dried should be removed with a
rag prior to tiling.
-250x250h.png "LIGHT LED Black LS-360")
